Vinh Concrete Pot - Maya

-Each pot includes a drainage hole for easy maintenance and plant vitality.

-GFRC is a type of glass-fibre-reinforced concrete and is distinctly different to concrete, poly resin, fibre stone, or GRC. GFRC has been developed specifically to withstand the wide ranges of weather variation found worldwide, from below freezing to over 50ºC.

-Each batch produced will vary in tone and patina and will change with use and age, and has variations in colour and texture within a single piece as part of cement's natural characteristics.

-Aesthetic imperfections may include, but not limited to, hairline cracks, uneven colouration, spots, exposed aggregate or fibre, all characteristically typical of concrete.

Vinh Concrete Pot Small
Outer Diameter: 38cm
Total Height: 45cm
Inner Diameter: 32cm
Inner Depth Height: 43cm
Weight: 10kg

Vinh Concrete Pot Medium
Outer Diameter: 46cm
Total Height: 51cm
Inner Diameter: 38cm
Inner Depth Height: 48cm
Weight: 15kg

Vinh Concrete Pot Large
Outer Diameter: 55cm
Total Height: 58cm
Inner Diameter: 46cm
Inner Depth Height: 55cm
Weight: 32kg

Clean your concrete product as you would to an exotic natural stone surface such as marble or onyx.
For general clean up, use warm water and soft or microfibre cloth to clean the surface.
For stubborn surface soils or stains, use a mild household cleaner or liquid soap (containing no abrasive, chlorine/bleach, or ammonium). A commercially available all-purpose / all-surface cleaner is appropriate.
If products containing antibacterial or disinfectant agents are used, always test an inconspicuous area of the piece to ensure your cleaner is compatible with the finish.

Always remove cleaning agent residue with a clean water and rinse immediately; then dry. Do not allow large standing water drops to air dry, or water spotting may occur.

Concrete is a porous material, water spotting may occur, but generally disappears after it has time to evaporate. While intense heat will not harm the concrete itself, setting a hot object directly on the surface may weaken or discolour the sealer, thus exposing the raw concrete to future staining and fading.